4. Panel Operation

UP/DOWN Button Press and hold the UP or DOWN button to move the lift in the desired direction. Release the Up or Down button to stop the lift. The lift will stop when the limit switch is reached.

AUTO-RUN To run the Lift Up or Down in automatic mode, Press the UP or DOWN button twice and release it. The Lift will then raise or lower until the limit switch is reached and then Stop. The lift can be stopped in “AutoRun” by pressing either the UP or DOWN button.

Note: The software will force a 3-second delay when changing the direction of the motors. Repeatedly running the motor in the SAME direction is fine. It will not incur any delay and should have no adverse effects even if the motor has not come to a complete stop.

Back to blog