6. Lift level app operation

Step 1: Select the “Level Controls” button from the “Lift Control” page. The “Level Controls” button is located on the left-hand side of the “Lift Control” screen.

Step 2: Noting the orientation of the motor 1,2,3, and 4, select the desired motor to be controlled and press the up arrow for an upward movement or down for a downward movement.

Step 3: Once the individual motor has been started, a red stop button will appear in the middle of the screen. Once the desired height has been reached press “STOP”. Select the “BACK” button at the top left corner to return to the lift screen.

Special Notes:

Motors 1, 2, 3, and 4 in the app correspond to the motor connectors 1,2,3, and 4 on the printed circuit board. In order for the position to be controlled correctly as it is displayed in the app, the motor connectors must be plugged into the correction position on the printed circuit board. The motor connectors on the printed circuit board can be moved to match the layout on the app.

Back to blog